Teach process operators the internal workings of heat transfer equipment. We have curated a few of our most popular process equipment animation samples below in this category including: air cooler, condenser, cooling tower, cryogenic heat exchanger, heat exchanger, heat recovery steam generator, heating / cooling jacket, thermosyphon reboiler.
Air coolers, also known as air cooled heat exchangers (ACHE), are a type of heat exchanger that forces air over a set of tube bundles to cool a process fluid.
After viewing the 1 min to 2 min movie session about the air cooler, the user will be able to:
Process fluid enters the inlet distribution header and flows through the tube bundle. As air from the fan passes over the tube bundle, the process fluid is cooled…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
The purpose of the cooling tower is to remove heat from cooling water.
After viewing the 1 min to 2 min movie session about the cooling tower, the user will be able to:
The water is sprayed through nozzles or drops through holes near the top of the tower, and then flows downward through the packing, opposite of the airflow…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
Cryogenic heat exchangers use a very cold media such as liquid nitrogen or liquid ammonia that partially vaporizes to a gas inside the exchanger shell to cool and condense another gas flowing through the exchanger tubes. Evaporation of the cryogenic media decreases its temperature further, which enhances the cooling effect.
After viewing the 1 min to 2 min movie session about the cryogenic heat exchanger, the user will be able to:
This causes some mixed refrigerant to flash into vapor which drastically reduces its temperature…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
A heat exchanger is a piece of equipment designed to efficiently transfer or exchange heat from one medium to another without mixing the fluids.
After viewing the 1 min to 2 min movie session about the heat exchanger, the user will be able to:
As the water travels back up through the risers, it is heated by burners to its boiling point and produces a mixture of water and steam…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
The heat recovery steam generator (HRSG) produces steam for plant consumption by recovering waste heat from a gas turbine exhaust stream.
After viewing the 1 min to 2 min movie session about the heat recovery steam generator, the user will be able to:
The steam passes through a desuperheater between the first and second passes of the superheater section…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
Heating and cooling jackets are designed to provide uniform heat exchange between the walls of a process vesseland the material circulating inside of the vessel.
After viewing the 1 min to 2 min movie session about the heating/cooling jacket, the user will be able to:
After exchanging heat with the vessel, the heating or cooling medium exits the jacket through the outlet valve…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
A thermosyphon reboiler is a type of shell and tube heat exchanger that is used to heat a fluid. It relies on natural convection instead of pumping to circulate the cold-side fluid.
After viewing the 1 min to 2 min movie session about the thermosyphon reboiler, the user will be able to:
The heating fluid, typically steam, enters the shell side at the top of the reboiler…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
A plate and frame heat exchanger uses a series of corrugated plates to provide heat transfer between two fluids.
After viewing the 1 min to 2 min movie session about the plate and frame exchanger, the user will be able to:
Cold fluid enters through an inlet port at the bottom of the fixed plates. Hot fluid enters through an inlet port at the top…
This short video is a snippet of a longer one used for learning purposes. Request a demo to see the entire video by CLICKING HERE.
These are small snippets of animation in our e-Learning library. Each e-Learning module includes an animation of one to two minutes in length, drag-and-drop exercises and quiz questions to reinforce the key concepts. These micro learning modules display the inner workings of the equipment so operators better understand what is happening inside the equipment.
Each e-Learning module can be added to your SCORM compatible learning management system (LMS). Choose the titles you need to create your own self-paced learning library. Inside your LMS, you control the sequence and pre-requisite learning requirements because you are in complete control of how you setup and deliver the Process Equipment Animation e-Learning.
You can choose from the e-Learning titles shown on this page, but if you need something specific to your organization, please CONTACT US; we make custom process equipment animations as well!
